WNMG060408-DR,WNMG060408-PM,WNMG080404-TC,High Hardness Tungsten Carbide Inserts For Non Grinding Turning Tools

High Hardness Tungsten Carbide Inserts For Non Grinding Turning Tools

Tungsten Carbide Inserts Introduction:

High-hardness carbide inserts, suitable for Aluminum, copper, Titan alloy, casting and wood.
Both turning and milling inserts.

Shining sharp, no buildups.

Good heat resistance, and wear resistance.

Suitable for cutting at higher temperatures.

Chemical stability, impact resistance.

10 pieces per box, clear packaging mark.

Forming turning tool is a special tool for processing the forming surface of revolving body. Its edge shape is designed according to the workpiece profile and can be used to process the forming surface of internal and external revolving body on various lathes. When parts are machined with formed turning tools, the surface of parts can be formed at one time. It is easy to operate and has high productivity. After processing, it can reach tolerance grade IT8~IT10, roughness is 10~5 micron, and it can ensure high interchangeability. However, the manufacture of forming turning tools is complex, the cost is high, and the working length of the blade is wide, so it is easy to cause vibration. Forming turning tools are mainly used to process large batches of medium and small size parts with formed surface.

Classification by use

(1) Turning tools can be divided according to their use.

(a) 90 degree turning tool (partial knife);
(b) 45 degree turning tool (elbow turning tool);
(c) Cutting knife;
(d) Boring cutters;
(e) Formed turning tools;
(f) Thread turning tools;
(g) Carbide non-grinding turning tools

(2) Basic uses of various turning tools

(a) 90 degree turning tool: used for turning the workpiece's outer circle, step and end face.
(b) 45 degree turning tool: used for turning the workpiece's outer circle, end face and chamfer.
(c) Cutting knife: used to cut the grooves cut out on the workpiece or workpiece.
(d) Boring cutter: used for turning the inner hole of the workpiece.
(e) Forming turning tools: used for turning fillets, grooves or workpieces with special shapes at the step.
(f) Thread turning tool: used for turning threads.

Chip breaker System

Full Specification

CCMT	SCMW	SECN	TEEN	VNMA	ODEW	DHD
CCMW	SCGW	SEGN	TECN	VBMW	XEEN	MP
CNMA	SNMA	SNGA	TEEW	VCMW	EDR	G25
CCGW	SNGN	TPGH	TECW	VNMG	SDR	ADEW
CNMN	SNMN	TCGW	RNMN	VNMP	DED	TEEW
CPMN	SPMN	TPGN	RNGN	VPGA	DGD	SDEN
DCGW	SPGN	TNMA	REEN	VPGR	DFD	SEEN
DNMA	SPCN	TEHW	RCMN	WNMA	... ..

DR double-sided groove description: Class P and K material light load rough processing recommended groove M double-sided chip breaking groove, light load rough processing preferred groove, metal removal rate and edge economy can be both.

TYPE	S			Φd		r
WNMG060408-DR	4.76			3.81		0.8
WNMG060412-DR	4.76			3.81		1.2
WNMG080408-DR	4.76			5.16		0.8
WNMG080412-DR	4.76			5.16		1.2
WNMG080416-DR	4.76			5.16		1.6

PM groove description: Class P material semi-finishing recommended groove M double-sided chip breaking groove, edge strength is higher than DM, suitable for semi-finishing under unstable working conditions, can also be used for cast iron processing, to obtain lower cutting force.

TYPE	S			Φd		r
WNMG060408-PM	4.76			3.81		0.8
WNMG060412-PM	4.76			3.81		1.2
WNMG080404-PM	4.76			5.16		0.4
WNMG080408-PM	4.76			5.16		0.8
WNMG080412-PM	4.76			5.16		1.2
WNMG080416-PM	4.76			5.16		1.6
WNMG080608-PM	6.35			5.16		0.8

TC groove description: Class P material semi-finishing recommended groove M double-sided chip breaking groove, edge strength is higher than DM, suitable for semi-finishing under unstable working conditions, can also be used for cast iron processing, to obtain lower cutting force.

TYPE	L	ΦI.C	S	Φd		r
WNMG080404-TC	8.7	12.7	4.76	5.16		0.4
WNMG080408-TC	8.7	12.7	4.76	5.16		0.8
WNMG080412-TC	8.7	12.7	4.76	5.16		1.2

   Zhuzhou Weikeduo Cemented Carbide Co., Ltd is located in Zhuzhou’s national-level high-tech development zone. Weikeduo has been designed and constructed all based on the requirements of production process of internationally leading cemented carbide and has in its possession internationally leading production and measurement equipment.

       At present, Weikeduo is concentrating its attention on the research and development and production of high- performance cemented carbide materia and high precision cemented carbide cutting inserts. Through recent years, it has gradually developed its products category and steadily improved products’ quality, winning good appraisal from customers both at home and abroad.0

     Imported internationally leading production process for cemented carbide and the overall implementation of ISO9001 total quality control system make the products quality stabilized and trusted. Weikeduo has in its possession quite a number of technical personnel with high and middle ranks including 3 national level specialists. Weikeduo all along adhere to the principle of “Human beings as the core” and has brought up an excellent team of staff and employees who make unremitting efforts to improve themselves and are bold in making innovations.

    “Creating value for customers, Weikeduo makes win-win a reality” is the Weikeduo’s firm and steadfast mission.